UGA SYSTEM-TECHNIK GmbH & Co. KG
Reliable sealing technology – for more than 30 years
UGA is a world leading company manufacturing gas and watertight building ducts of the highest quality.
It is situated in the South of Germany.
Safe cable and pipe penetration made by UGA
• For more than 30 years UGA is specialist for gas and watertight penetrations
• Short and easy assembly time
• Permanent and reliable sealing
• Made to measure for challenging building sites
• Cable entries
• Wall sleeves
Seal safely and fast – with the GPD system made by UGA
GPD rubber press seals are used for the fast and reliable sealing of calbes and pipes. They are suitable for universal use in the field of electricity and water supply as well as in structual and civil engineering. They can be used in core drillings made of watertight concrete (BLK-1 and -2), wall sleeves and bayonet cable entries (BKD system).
With plica you get GPD rubber press seals suitable to your building site:
• Durability through valuable materials, also for standard articles (EPDM rubber, A2 stainless steel)
• Proven gas and watertight up to 5 bar
• Split version suitable for subequent installation of cables already laid
• Made to measure for your application
• Drillings up to your requirements
• Also available as blind plug without drillings
• Selectable materials up to demand, e. g. use of silicone rubber for temperature resistance
GPD rubber press seal, closed or split version30 mm thickness of rubber
• Tightness: up to 2.5 bar
• Split version for subsequent installation of cables/pipes
GPD rubber press seal with exchangeable insertsSplit version60 mm thickness of rubber
• Tightness: up to 5 bar
• For subsequent installation of cables/pipes
• Easy and affordable change of configuration is possible due to replacing exchangeable insert
GPD rubber press seal, closed or split version60 mm thickness of rubber
• Tightness: up to 5 bar
• Split version for subsequent installation
GPD rubber press seal with multilayer insertSplit version40 mm thickness of rubber
• Tightness: up to 2.5 bar
• For subsequent installation of cables
• High flexiblity due to rubber elements that can be adapted to diameter of cable
Sealing cables in no time – The BKD system made by UGA
The BKD product range is a gas and watertight system for fast and easy sealing of cables and reserve conduits. It is suitable for all kinds of wall openings.
With plica you get BKD system suitable to your building site:
• Embedding in concrete into walls or subsequent plugging
• Durability through valuable materials
• Permanent and reliable sealing
• Proven gas and watertight up to 2.5 bar
• Variable assembly in batteries
• Lots of variants and connection options like system covers or cable protection systems
• Fast and simple assembly
• Easy and reliable sealing with bayonet mount system and shrink technology
With the help of the UGA sleeve technology all kinds of pipes and tubes can be connected to the BKD system.
_1.jpg)
_1.jpg)
BKD double wall insert
• Embedding in concrete
• Suitable for connection a BKD system cover or KSS cable protection system
• From 100 mm wall thickness
BKD wall insert with sleeve
• Direct connection to end of reserve conduits
• Possible use before casting concrete in foundation entry.
• For preparation for later sealing of BKD system cover or BKD system insert
BKD assembly flange
• For sealing of a core drilling in a wall or ceilingn
• Suitable for connection a BKD system cover or BKD system inserts
BKD system cover in different versions
• (illustration exemplary)
• Sealing of cables or pipesIncl. thermal shrink sleeves resp. rubber sleeve
Cold shrink sleeves on request
Cable protection system KSS
• Reliable protection against moisture and mechanical effects
• Various connection components for wall inserts, wall sleeves, core drillings and other cable protection pipes
• Embedding in concrete possible
Swan-neck entry for roofs SHDD
• For all kinds of roof structures
• Gas and watertight entry for cables
• Split version for variable fitting, changing and retrofitting of cables
• Available in 4 sizes
Wall sleeves FU
• Made of plastic, fibre cement or stainless steel
• Embedding in concrete or subsequent plugging
• Various diameter and lengths available
• Different variants for all kinds of walls
Fibreglass expansion with fibreglass entry SPE
• Fast and simple assembly
• Gas- and watertight up to 1 bar
• Completion of exterior work in one step
The plica specialists require the following information.
1. Diameter core drill hole
2. Diameter pipe or cable
3. For pressing water 5 bar, for non-pressing water 2.5 bar
4. Closed or two-piece, for retrofitting
Our specialists will gladly support you and develop a solution to match your application. Please call us or complete our contact form. Thank you
Öffnungszeiten
Montag bis Freitag
7:00 - 12:00 / 13:00 - 17:15