Signal-Cap valve marking

The Signal-Cap valve marking provides clear and highly visible identification of valves, hydrants and other technical access points. It is placed directly in the installation area and helps important information to be assigned quickly and clearly.

The coloured version supports easy visual orientation on site. Depending on the application, the marking cap can be used, for example, in blue for water, in yellow for gas or in red for hydrant areas. The integrated loop makes removal easier during inspection, maintenance or operation.

The marking can be adapted with 10 mm clips for numbers, letters and blank fields. The clips can be inserted or replaced as required, allowing relevant information to be displayed clearly on site. The set includes additional blank fields for individual marking as well as a cable tie.

Standard texts:
The Signal-Cap valve marking is available with German standard texts. The texts on the cap are in German only, including NICHT betätigen, Achtung DIALYSE, DEFEKT, KEIN Löschwasser, Klappe Umdr., Gestänge defekt, gesperrt-stillgelegt, Info, Kugelhahn, Zonenschieber, Entleerungsschieber and Messzonenschieber.

Application:
For marking valves, hydrants and other technical access points in municipal, industrial and building technology applications.

Note:
Not suitable for street caps for house connections similar to DIN 4057. Suitability for the respective installation situation must be checked on site.