Cable tray perforated UNEX 3 m, UNEX U23X Insulating cable tray according to IEC 61537: 2006 (The values indicated according to IEC 61537: 2006 have been tested under its European implementation EN 61537:2007. For support, protection and conduction of cables. Good performance outdoor, to corrosion and to chemical agents (ISO/TR 10358, DIN8061). Designed to support full load. Unex insulating cable tray with cover, by complying with the European Standard EN 50085-2-1, is considered a protecting enclosure (trunking). Impact test for trunkings: IK10 (with cover fixing). Safety: electrical; mechanical (protection against impacts 20J acc. IEC 61537; designed to work at 100% cable capacity) and in front of fire (glow-wire test at 960°C; non-flame propagator). Easy and quick mounting. No burrs at cutting. Insulating material. Length: 3m. Colour: grey RAL7035.>Order the lid separately
Unperforated cable tray, UNEX U23X Insulating cable tray according to IEC 61537: 2006 (The values indicated according to IEC 61537: 2006 have been tested under its European implementation EN 61537:2007. For support, protection and conduction of cables. Good performance outdoor, to corrosion and to chemical agents (ISO/TR 10358, DIN8061). Designed to support full load. Unex insulating cable tray with cover, by complying with the European Standard EN 50085-2-1, is considered a protecting enclosure (trunking). Impact test for trunkings: IK10 (with cover fixing). Safety: electrical; mechanical (protection against impacts 20J acc. IEC 61537; designed to work at 100% cable capacity) and in front of fire (glow-wire test at 960 °C; non-flame propagator). Easy and quick mounting. No burrs at cutting. Insulating material. Length: 3 m. Colour: grey RAL7035. >Order cover separately
Butt joint connector without bolt, UNEX U23X For mechanical connection of cable tray sections. The use of bolts with clamps is recommended for all butt joints to absorb possible expansions in areas with temperature fluctuations (e.g. outdoor installations). Color: gray. Insulating material. Very stable. Absorbs expansions.
Cover cable support system UNEX U23X For the protection of cables and insulation of cable trays. Insulating material. Color: gray. Attachment by pressing on, without screws. IK10 (with cover clip for height 60mm part no. 107600072, for height 100mm part no. 107600073).
Butt joint shim w. Bolt, UNEX U23X For mechanical connection of cable tray sections. 2 bolts with clamps are supplied. The use of bolts with clamps is recommended for all butt joints to absorb possible expansions in areas with temperature variations (e.g. outdoor installations). Color: gray. Insulating material. Very stable. Absorbs expansions.
End cap, UNEX U23X For covering ends. 2 screws for mounting are included. Color: gray. Insulating material. Electrical and mechanical safety. Easy and quick assembly.
Flat arch 90°, UNEX U23X For the change of direction by 90º. Conceal the interfaces of the cable tray and the cover, for a better finish of the installation. It is recommended to install outriggers under the horizontal bend. Color: light gray Insulating material. Electrical and mechanical safety. High load capacity. No loss of cross-section in relation to the cable tray. Easy and quick assembly.
Elbow cover 90°, UNEX U23X To cover flat corners 90º. 2 SST screws are included for optional cover fixing. Colour: grey RAL7035. Insulating material. Safety: electrical, mechanical and against fire. No loss of cross-section with regard to the cable tray. Quick and easy mounting.
T-branch, UNEX U23X To realize branches of 90°. No loss of cross section. Color: light gray RAL 7035. Insulating material. Bending radius 160mm. Quick and easy assembly. No butt joints necessary. Good weathering behavior.
Cover for T-branch, UNEX U23X To cover Semi T. Colour: Colour: grey RAL7035. Insulating material. Quick and easy mounting. 4 SST screws are included for optional cover fixing. Hides the cut marks of both cable tray and cover, adding quality finish to the installation.
U-profile perforated UNEX For connecting boom to "U" connector perforated. Use metal anchors. The cut metal edges should be painted after their deburring at the unprotected interfaces to ensure the same protection as on the rest of the part. When using the mounting pin, no screws are required for fixing the cantilevers. Safe, quick and easy assembly.
U-profile perforated 2m UNEX U23X To join several levels of horizontal brackets directly to the wall. Use metal screws Ø8. Insulating material. Safety: electrical, mechanical and against fire.