English
Newsletter
Quick recording
BOM-Tool
Plica AG
Compare
Shopping cart 0
    Subtotal 0.00
    Go to shopping cart

    ATEX Switch-Disconnectors

    Filter
    Action type
    Version as emergency stop installation
    16 Products
    • New
      ATEX emergency stainless-steel switch-disconnector, IP66, 20–63 A
      ATEX emergency stainless-steel switch-disconnector, IP66, 20–63 A
      The ATEX emergency switch-disconnector in an AISI 316L stainless-steel enclosure, IP66, 20–63 A from the SCAME ISOLATORS-EX[GD] series is designed to safely switch off and isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The corrosion-resistant stainless-steel enclosure is suitable for demanding chemical and atmospheric conditions. Mechanical interlocking is provided by a non-sparking switch-disconnector. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. An earth stud is included. Depending on the rated current, M25, M32 or M40 cable entries are provided.

      Application: For emergency stop and isolation functions in Gas Zones 1 and 2 and Dust Zones 21 and 22.
      from 
      CHF 
      1'226.40
       / 1 pcs
      from 
      CHF 
      1'226.40
       / 1 pcs
      5 Versions
    • New
      ATEX emergency stainless-steel switch-disconnector, IP66, 20–63 A, low temperature
      ATEX emergency stainless-steel switch-disconnector, IP66, 20–63 A, low temperature
      The ATEX emergency switch-disconnector in an AISI 316L stainless-steel enclosure, IP66, 20–63 A in a low-temperature version from the SCAME ISOLATORS-EX[GD] series is designed to safely switch off and isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The corrosion-resistant stainless-steel enclosure is suitable for demanding chemical and atmospheric conditions. Mechanical interlocking is provided by a non-sparking switch-disconnector. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. An earth stud is included. Depending on the rated current, M25, M32 or M40 cable entries are provided.

      Application: For emergency stop and isolation functions in Gas Zones 1 and 2 and Dust Zones 21 and 22, particularly under demanding ambient conditions.
      from 
      CHF 
      1'594.70
       / 1 pcs
      from 
      CHF 
      1'594.70
       / 1 pcs
      5 Versions
    • New
      General-purpose ATEX stainless-steel switch-disconnector, IP66
      General-purpose ATEX stainless-steel switch-disconnector, IP66
      The general-purpose ATEX switch-disconnector in an AISI 316L stainless-steel enclosure, IP66, 20–63 A from the SCAME ISOLATORS-EX[GD] series is designed to safely isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The corrosion-resistant stainless-steel enclosure is suitable for demanding chemical and atmospheric conditions. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. An earth stud is included. Depending on the rated current, M25, M32, M40 or M50 cable entries are provided. The SCAME colour code is BE.

      Application: For isolation, maintenance and repair functions in Gas Zones 1 and 2 and Dust Zones 21 and 22.
      from 
      CHF 
      1'226.40
       / 1 pcs
      from 
      CHF 
      1'226.40
       / 1 pcs
      5 Versions
    • New
      General-purpose ATEX stainless-steel switch-disconnector, IP66, low temperature
      General-purpose ATEX stainless-steel switch-disconnector, IP66, low temperature
      The general-purpose ATEX switch-disconnector in an AISI 316L stainless-steel enclosure, IP66, 20–63 A in a low-temperature version from the SCAME ISOLATORS-EX[GD] series is designed to safely isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The corrosion-resistant stainless-steel enclosure is suitable for demanding chemical and atmospheric conditions. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. An earth stud is included. Depending on the rated current, M25, M32, M40 or M50 cable entries are provided. The SCAME colour code is BE.

      Application: For isolation, maintenance and repair functions in Gas Zones 1 and 2 and Dust Zones 21 and 22, particularly under demanding ambient conditions.
      from 
      CHF 
      1'594.70
       / 1 pcs
      from 
      CHF 
      1'594.70
       / 1 pcs
      5 Versions
    • ATEX emergency switch-disconnector IP66, 20–40 A
      ATEX emergency switch-disconnector IP66, 20–40 A
      The ATEX emergency switch-disconnector IP66 from the SCAME ISOLATORS-EX series is designed to safely isolate electrical loads in hazardous areas with combustible dust. The surface-mounted versions are available in 20, 32 or 40 A with 3 or 4 poles and are rated up to 690 V at 50/60 Hz.
      The robust engineering-thermoplastic enclosure provides IP66 protection and includes two M25 and one M20 cable entry. The handle can be locked with up to three padlocks in the OFF position and one padlock in the ON position. This allows the switching state to be secured during maintenance, cleaning and emergency situations.

      Application: For emergency stop and isolation functions in Dust Zones 21 and 22, including machinery, conveyor systems and industrial equipment.
      from 
      CHF 
      174.00
       / 1 pcs
      from 
      CHF 
      174.00
       / 1 pcs
      6 Versions
    • New
      General-purpose ATEX switch-disconnector, IP66
      General-purpose ATEX switch-disconnector, IP66
      The ATEX switch-disconnector IP66 from the SCAME ISOLATORS-EX series is designed to safely isolate electrical loads in hazardous areas with combustible dust. The surface-mounted versions are available in 20, 32 or 40 A with 3 or 4 poles and are rated up to 690 V at 50/60 Hz.
      The robust engineering-thermoplastic enclosure provides IP66 protection and includes two M25 and one M20 cable entry. The handle can be locked with up to three padlocks in the OFF position and one padlock in the ON position. This allows the switching state to be secured during maintenance, cleaning and repair work.

      Application: For isolation, maintenance and repair functions in Dust Zones 21 and 22, including machinery, conveyor systems and industrial equipment.
      from 
      CHF 
      174.00
       / 1 pcs
      from 
      CHF 
      174.00
       / 1 pcs
      6 Versions
    • New
      ATEX emergency switch-disconnector metal, IP65, 20–63 A
      ATEX emergency switch-disconnector metal, IP65, 20–63 A
      The ATEX emergency switch-disconnector in a metal version, IP65, from the SCAME ISOLATORS-EX series is designed to safely isolate electrical loads in hazardous areas with combustible dust. The surface-mounted versions are available in 20, 32, 40 or 63 A with 3 or 4 poles and are rated up to 690 V at 50/60 Hz.
      The robust die-cast aluminium enclosure is grey RAL 7015 and provides IP65 protection. The 20, 32 and 40 A versions have two M25 and one upper M20 cable entry. The 63 A versions have two M32 and one upper M20 cable entry. The handle can be locked with up to three padlocks in the OFF position and one padlock in the ON position.

      Application: For emergency stop and isolation functions in Dust Zones 21 and 22, including machinery, conveyor systems and industrial equipment.
      from 
      CHF 
      156.85
       / 1 pcs
      from 
      CHF 
      156.85
       / 1 pcs
      8 Versions
    • New
      General-purpose ATEX metal switch-disconnector, IP65
      General-purpose ATEX metal switch-disconnector, IP65
      The general-purpose ATEX switch-disconnector in a metal version, IP65, from the SCAME ISOLATORS-EX series is designed to safely isolate electrical loads in hazardous areas with combustible dust. The surface-mounted versions are available in 20, 32, 40 or 63 A with 3 or 4 poles and are rated up to 690 V at 50/60 Hz.
      The robust die-cast aluminium enclosure is grey RAL 7015 and provides IP65 protection. The 20, 32 and 40 A versions have two M25 and one upper M20 cable entry. The 63 A versions have two M32 and one upper M20 cable entry. The handle can be locked with up to three padlocks in the OFF position and one padlock in the ON position.

      Application: For isolation, maintenance and repair functions in Dust Zones 21 and 22, including machinery, conveyor systems and industrial equipment.
      from 
      CHF 
      156.85
       / 1 pcs
      from 
      CHF 
      156.85
       / 1 pcs
      8 Versions
    • New
      ATEX emergency aluminium switch-disconnector, IP66, 20–63 A, low temperature
      ATEX emergency aluminium switch-disconnector, IP66, 20–63 A, low temperature
      The ATEX emergency switch-disconnector in die-cast aluminium, IP66, 20–63 A in a low-temperature version from the SCAME ISOLATORS-EX[GD] series is designed to safely switch off and isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The robust yellow/red die-cast aluminium enclosure is suitable for gas and dust hazardous areas. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. Mechanical interlocking is provided by a non-sparking switch-disconnector. An earth stud is included. Depending on the rated current, M25, M32, M40 or M50 cable entries are provided.

      Application: For emergency stop and isolation functions in Gas Zones 1 and 2 and Dust Zones 21 and 22, particularly under demanding ambient conditions.
      from 
      CHF 
      187.10
       / 1 pcs
      from 
      CHF 
      187.10
       / 1 pcs
      5 Versions
    • New
      ATEX emergency aluminium switch-disconnector, IP66, 20–63 A
      ATEX emergency aluminium switch-disconnector, IP66, 20–63 A
      The ATEX emergency switch-disconnector in die-cast aluminium, IP66, 20–63 A from the SCAME ISOLATORS-EX[GD] series is designed to safely switch off and isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The robust yellow/red die-cast aluminium enclosure is suitable for gas and dust hazardous areas. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. Mechanical interlocking is provided by a non-sparking switch-disconnector. An earth stud is included. Depending on the rated current, M25, M32, M40 or M50 cable entries are provided.

      Application: For emergency stop and isolation functions in Gas Zones 1 and 2 and Dust Zones 21 and 22.
      from 
      CHF 
      777.10
       / 1 pcs
      from 
      CHF 
      777.10
       / 1 pcs
      5 Versions
    • New
      General-purpose ATEX aluminium switch-disconnector, IP66, low temperature
      General-purpose ATEX aluminium switch-disconnector, IP66, low temperature
      The general-purpose ATEX switch-disconnector in die-cast aluminium, IP66, 20–63 A in a low-temperature version from the SCAME ISOLATORS-EX[GD] series is designed to safely isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The robust die-cast aluminium enclosure is suitable for gas and dust hazardous areas. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. An earth stud is integrated in the enclosure. Depending on the rated current, M25, M32, M40 or M50 cable entries are provided. The SCAME colour code is BE.

      Application: For isolation, maintenance and repair functions in Gas Zones 1 and 2 and Dust Zones 21 and 22, particularly under demanding ambient conditions.
      from 
      CHF 
      1'005.95
       / 1 pcs
      from 
      CHF 
      1'005.95
       / 1 pcs
      5 Versions
    • New
      General-purpose ATEX aluminium switch-disconnector, IP66
      General-purpose ATEX aluminium switch-disconnector, IP66
      The general-purpose ATEX switch-disconnector in die-cast aluminium, IP66, 20–63 A from the SCAME ISOLATORS-EX[GD] series is designed to safely isolate electrical loads in industrial hazardous areas. The surface-mounted versions are rated for 690 V at 50/60 Hz and are available in 3/4-pole configurations.
      The robust die-cast aluminium enclosure is suitable for gas and dust hazardous areas. The handle can be secured with up to three padlocks in the OFF position and one padlock in the ON position. An earth stud is integrated in the enclosure. Depending on the rated current, M25, M32, M40 or M50 cable entries are provided. The SCAME colour code is BE.

      Application: For isolation, maintenance and repair functions in Gas Zones 1 and 2 and Dust Zones 21 and 22.
      from 
      CHF 
      777.10
       / 1 pcs
      from 
      CHF 
      777.10
       / 1 pcs
      5 Versions
    Brauchen Sie Hilfe?

    Wir sind für Sie da und beraten Sie gerne. Rufen Sie uns an, schicken Sie uns eine Nachricht oder lassen Sie sich von uns zurückrufen.

    Öffnungszeiten

    Montag bis Freitag :
    7:00 - 12:00 / 13:00 - 17:00
    Freitag :
    7:00 - 12:00 / 13:00 - 16:30

    +41 (0)52 723 67 20
    Request a callback
    Send an email
    Plica AG
    Back to the overview
    Products
    Plica AG